manualshive.com logo in svg

WAGNER Cobra 40-10/2K, Перевод оригинального руководства по эксплуатации

Поделиться
Скачать
WAGNER Cobra 40-10/2K Скачать руководство пользователя страница 13

13

OPERATING MANUAL

VERSION 07/2014

ORDER NUMBER DOC2349980

4 

GENERAL SAFETY INSTRUCTIONS

4.1 

SAFETY INSTRUCTIONS FOR THE OPERATOR

4.1.1 

ELECTRICAL EQUIPMENT

4.1.2 

PERSONNEL QUALIFICATIONS

4.1.3 

SAFE WORK ENVIRONMENT

  Keep this operating manual at hand near the device at all times.
 Always follow local regulations concerning occupational safety and accident 

prevention.

Electrical devices and equipment

  To be provided in accordance with the local safety requirements with regard to the 

operating mode and ambient infl uences.

  May only be maintained by skilled electricians or under their supervision.
  Must be operated in accordance with the safety regulations and electrotechnical 

regulations.

  Must be repaired immediately in the event of problems.
  Must be decommissioned if they pose a hazard.
  Must be de-energized before work is commenced on active parts. Inform staff  about 

planned work. Observe electrical safety regulations.

  Ensure that the device is only operated, maintained and repaired by trained persons.

  Ensure that the fl oor in the working area is static dissipative in accordance with 

EN 61340-4-1 (resistance must not exceed 100 megohms).

  Ensure that all persons within the working area wear static dissipative shoes. Footwear 

must comply with EN 20344. The measured insulation resistance must not exceed 
100 megohms.

  Ensure that during spraying, persons wear static dissipative gloves. Grounding takes 

place via the spray gun handle.

  If protective clothing is worn, including gloves, it has to comply with EN 1149-5. The 

measured insulation resistance must not exceed 100 megohms.

  Paint mist extraction systems/ventilation systems must be fi tted on site according to 

local regulations.

  Ensure that the following components of a safe working environment are available:

 

- Product/air hoses adapted to the working pressure.

 

- Personal safety equipment (breathing and skin protection).

  Ensure that there are no ignition sources such as naked fl ames, sparks, glowing wires, 

or hot surfaces in the vicinity. Do not smoke.

Содержание Cobra 40-10/2K

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды