WAGNER AirCoat GM 4600AC-H, Перевод оригинального руководства по эксплуатации

Страница: 16 / 48

16
GM 4600AC
C
D
E
F
G
K
A
H
J
L
I
M
B
B_02673
OPERATING MANUAL
EDITION 05/2011 Part No. DOC394861
5
STARTING UP AND OPERATING
5.1.1
TYPICAL AIRCOAT SPRAYING SYSTEM
A Material pump
B Pressure air shut off valve
C Pressure regulator
D Air pressure regulator with fi lter
E Earthing cable
F Air hose, electric conductive
The pray gun GM 4600AC must be used a part of a spraying system. The spraying system
shown in the fi gure is only one example of an electrostatic Aircoat spraying system. It is
not an actual system design. Contact your Wagner distributor for assistance in designing a
system to meet your needs.
The operating instructions and the safety regulations for the additional system
components used must be read before starting-up.
5.1
INSTALLATION AND CONNECTION
WARNING
Incorrect installation/operation!
Risk of injury and damage to equipment
œ
When putting into operation and for all work, read and follow
the operating instructions and safety regulations for the additionally
required system components.
SIHI_0050_GB
G AirCoat gun
H High-pressure paint hose
I High-pressure fi lter/Relief valve
J Return
K Stand trolley
L Suction system
M Compressed air main