WAGNER AirCoat GM 4600AC-H, Перевод оригинального руководства по эксплуатации

Страница: 9 / 48

9
GM 4600AC
OPERATING MANUAL
EDITION 05/2011 Part No. DOC394861
2.4.1
CORRECT USE
2.4.2
EXPLOSION PROTECTION IDENTIFICATION
2.4.3
MAXIMUM SURFACE TEMPERATURE
2.4.4
SAFETY INSTRUCTIONS
2.4
USE IN HAZARDOUS LOCATIONS
4HEUNITISSUITABLEFORWORKINGLIQUIDMATERIALSINACCORDANCEWITHTHECLASSIlCATIONINTO
EXPLOSIONCLASSES
As defined in the Directive 94/9/CE (ATEX 95), the unit is suitable for use in areas where
there is an explosion hazard.
II 2G X
CE: Communautés Européennes
Ex: Symbol for explosion protection
II: Unit class II
2: Category 2 (Zone 1)
G: Ex-atmosphere gas
X: See: "Special Notes" in the operating manual
3AFEHANDLINGOF7!'.%2SPRAYUNITS
-ECHANICALSPARKSCANFORMIFTHEUNITCOMESINTOCONTACTWITHMETAL
)NANEXPLOSIVEATMOSPHERE
œ $ONOTKNOCKORPUSHTHEUNITAGAINSTSTEELORRUSTYIRON
œ $ONOTDROPTHESPRAYGUN
œ 5SEONLYTOOLSTHATAREMADEOFAPERMITTEDMATERIAL
)GNITIONTEMPERATUREOFTHECOATINGMATERIAL
œ %NSURETHATTHEIGNITIONTEMPERATUREOFTHECOATINGMATERIALISABOVETHEMAXIMUM
SURFACETEMPERATURE
-EDIUMSUPPORTINGATOMIZING
œ 4OATOMIZETHEMATERIALUSEONLYWEAKLYOXIDIZINGGASESEGAIR
#LEANING
)FTHEREAREDEPOSITSONTHESURFACESTHEUNITMAYFORMELECTROSTATICCHARGES&LAMESOR
SPARKSCANFORMIFTHEREISADISCHARGE
œ 2EMOVEDEPOSITSFROMTHESURFACESTOMAINTAINCONDUCTIVITY
X: The maximum surface temperature corresponds to the permissible material temperature.
This and the permissible ambient temperature can be found in the Technical Data.
2.5
GERMAN REGULATIONS AND GUIDELINES
See chapter 3.3