WAGNER 0241623, Руководство по эксплуатации

Страница: 6 / 20

Start up
6
0241886
– HiCoat-ED Pump
08/2008
2. Start up
2.1 Preparing the HiCoat-ED Pump
Caution
The HiCoat-ED Pump must be grounded to prevent static charging!
In this case, you must use the Wagner Special hose!
2.1.1 Connecting the powder hose
Push the powder hose 2 onto the collector-nozzle 1 until it is firmly fixed.
Here, you should use the Special hose with an inner diameter of 8, 9 or 10 mm, as
illustrated in chapter 5.4 " Special accessories ". This hose is equipped with an integrated
grounding wire, which contributes greatly to preventing powder charging.
1 2
PI_01
Conductive
collector-nozzle
Powder hose with
grounding wire
Conductive nut
2.1.2 Grounding
The HiCoat-ED Pump must be fitted with a grounding cable in application modes.
The grounding cable must be connected
to the rear side of the control unit or to
the system ground:
M5 threaded hole with 4 mm core hole
diameter for grounding cable
See chapter
5.4 " Special accessories "
for article numbers.
Use only conductive O-ring.
LA_02