Wagner Meters Orion 910, Инструкция по эксплуатации

Страница: 6 / 21

7 8
To make sure that you are getting the most
accurate readings from your Orion® 910
meter, Wagner Meters recommends that
you pay close attention to the following
guidelines:
1. If the thickness of the piece of wood
or other building material is greater
than 1.5 inches (38mm), it is a good
idea to take measurements on both
sides and average the readings.
2. To prevent high or inaccurate readings,
always have a minimum 1-inch (25mm)
air gap underneath the piece of wood
you are measuring. During this
process, make sure your hand is not
directly underneath the meter.
3. Your Orion® 910 meter was designed
for wood thicknesses from .75 inches
(19mm) up to 1.5 inches (38mm).
CORRECT USAGE GUIDELINES
FOR YOUR ORION® 910
MOISTURE METER
dimension needs to be 2.0 inches (50mm)
wide by 2.5 inches (63mm) long by .75
inches (19mm) in thickness. When taking
measurements, make sure there is a 1-inch
(25mm) minimum air gap underneath the
wood you are measuring (refer to Correct
Usage Guidelines section of this manual).
When you are finished
taking measurements and
wish to turn the meter
off, press the ON/HOLD
button for approximately
2 seconds. Alternatively, the meter will
automatically shut off after approximately
60 seconds of no activity.