Wagner Meters Orion 910, Инструкция по эксплуатации

Страница: 11 / 21

17 18
mode. Once in Standard
Measurement mode, 0.0
will be displayed on the
screen if the meter is held
in the air. The programmed
setting will be retained in memory even if
the meter is powered off or the battery has
been changed. If you press and release the
SPECIES/MATERIAL button in the future,
the last programmed setting will appear on
the screen.
Relative Scale for Moisture Measurement
of Non-Wood Building Materials
As mentioned earlier, this
mode can be entered by
pressing and releasing the
SPECIES/MATERIAL
button until you are in this
mode (display will show REL in lower left
corner). Once in this mode, your meter
will be in a relative measurement scale
(0-100) for measuring non-solid wood or
non-wood based materials. Press the ON/
HOLD button to return to the Standard
Measurement mode.
down, the setting will change by another .10
(e.g., from .40 to .50).
If the DOWN button is
pressed and held for 0.7
seconds, the setting will
decrease to the next multiple
of .10 (e.g., if the setting is
currently .66, the setting will change to .60).
Every 0.7 seconds thereafter that the button
is pressed and held, the setting will change
by another .10 (e.g., from .60 to .50).
When pressing the UP arrow button, once
the maximum setting of 1.00 has been
reached, the setting will wrap around to the
minimum (.20) and continue to increase
from there. Similarly, when continuing to
press the DOWN button, if the minimum
setting of .20 has been encountered, the
setting will wrap around to the maximum
(1.00) and continue to decrease from
that point.
Once the species value has been set,
press and release the ON/HOLD button
to return the meter to measurement