Subject to modifications, errors excepted. · © Wagner & Co, 2007 · www.wagner-solar.com
8
WAGNER & CO · Zimmermannstraße 12 · D-35091 Cölbe/Marburg ·
☎
+49 6421 80 07-0 · Fax 80 07-22
5. Accessories
Accessories
Description
Order No.
Kit for solar circuit
Accessories for the solar circuit pipe work:
2 filler and drain valves and 2 earth connector clips
190 210 22
Air release kit (not
normally required
because of included air
vent pipe)
Automatic air release kit
Consisting of 2 automatic air release valves and heat resistant ball valves
(up to 200° C), connection 3/8"
190 210 11
Manual air release set
Consisting of 2 Manual Air Release Valves 3/8" and Key
190 210 10
CIRCO –
expansion vessel kit
Expansion vessel for the CIRCO 5 solar circulation unit, operating pressure max.
10 bar, stainless steel connection hose, connection ¾" female with gasket
12 l-volume, incl. wall mounting bracket, pre-pressurised: 1.5 bar
18 l-volume, incl. wall mounting bracket, pre-pressurised: 1.5 bar
24 l-volume, incl. wall mounting bracket, pre-pressurised: 1.5 bar
35 l-volume, with brackets for wall and floor fixing, pre-pressurised: 2.5 bar
150 300 70
150 300 77
150 300 98
150 300 99
Cap check valve for
expansion vessel
Check valve 3/4" with filler and drain valve and with cap against maloperation.
819 200 27
Cylinder mounting kit for
CIRCO 5
Non-adjustable pipe work 1¼" male flat tightening, insulated, adjustable return
pipe for cylinder connections with 400 to 640 mm vertical distance, with 22 mm
sleeves to connect to compression fittings of CIRCO 5
150 301 21
