Wagan LITHIUM CUBE EX5, Руководство пользователя

Страница: 7 / 16

User’s Manual—Read before using this equipment
© 2023 Wagan Corporation. All Rights Reserved
Wagan Tech and wagan.com are trademarks of Wagan Corporation
7
5. OUTPUT POWER
Before using the Lithium Cube, please make sure the main power has been turned on.
AC OUTPUT
The Lithium Cube’s inverter can operate most AC Appliances or a combination of appliances
up to 500 watts. Operating time (run time) is dependent on the AC load (watts) and the charge
and condition of the Lithium Cube’s internal battery. Be sure to turn off or disconnect any AC
appliance not in use.
Converting DC battery power to AC generates heat. To minimize heat buildup and possible
thermal shutdown, remove obstacles blocking or hindering airflow between the intake and
exhaust sides of the Lithium Cube. Ambient temperatures above 77 ºF will reduce the Inverter’s
ability to cool effectively, thus affecting operating times.
This inverter produces Pure Sine Wave (PSW) AC, which mimics the same power coming from
your wall outlets at home.
To use the AC Power Inverter:
1. Connect the AC appliance or appliances to any AC Outlet.
2. Turn the power inverter ON by pressing the AC power button.
3. Turn on one AC appliance and observe the power indicator.
4. After appliance use, turn OFF the AC power button.
5. Remove AC appliance plug(s) from the AC outlets on the Lithium Cube.
6. Recharge the Lithium Cube as soon as convenient.
Note: The cooling fan turns off and on when needed to keep the internal components cool. The
cooling fan helps maintain the Lithium Cube’s internal temperature when products with high
power requirements are in use.
DC OUTPUT
The Lithium Cube is equipped with 12V DC output ports to power various DC appliances via a
standard DC socket or an Anderson power port (10A max shared).
Overloading the DC port will trip a safety circuit. Remove the overload to restore power to the
DC output ports.
CAUTION—Do not insert an automotive cigarette lighter into the socket. There is no pop-out
feature and excessive heat may damage the socket.
To use an accessory outlet:
1. Insert the 12V DC accessory plug into either the DC port or Anderson port.
2. Press the DC power button. DC symbol should show on display.
3. Operate the appliance as usual.
4. After use, disconnect the accessory plug and store the accessory.