Wagan LITHIUM CUBE EX5, Руководство пользователя

Страница: 5 / 16

User’s Manual—Read before using this equipment
© 2023 Wagan Corporation. All Rights Reserved
Wagan Tech and wagan.com are trademarks of Wagan Corporation
5
LCD DISPLAY
Battery Level
Remaining Charge/
Discharge Time
Input Power
Output Power
Battery Failure
Warning
High Temperature
Warning
Error Warning
AC Input
Fan Indicator
AC Output
Output Frequency
DC Output
USB
LED Light
Low Temperature
Warning
Remaining Battery
Percentage
4. PRODUCT OPERATION
CHARGING THE CUBE
AC Charging
The intelligent fast-charging technology of Wagan supports an AC input power of 300W.
Please use the official Wagan cable for AC charging. Using the supplied AC Charging Cable,
plug one end of the cable into the AC Charging input port on the side of the Lithium Cube, then
plug the other end of the cable into an AC Wall outlet that supports a current of 10A or greater.
Wagan is not responsible for any damage caused by using an unofficial charging cable or
operating the product outside of specifications.
DC Charging
The DC charging cable is fused at 10 amps to prevent damage if there is an inadvertent short.
Users can charge the product through the cigarette lighter port. Be sure to start the vehicle
before using the DC Charging Cable to reduce the risk of depleting your vehicle’s battery.
To charge the Lithium Cube using the DC Charging Cable:
ONLY USE THE DC CHARGING CABLE SUPPLIED WITH THIS UNIT.
1. Note that the engine must be running while charging the Lithium Cube to avoid
discharging the vehicle’s battery.
2. Plug the DC charging cable into the Lithium Cube’s DC Anderson input port.