background image

WAFER GSM-RELAY REMOTE CONTROL UNIT 

http://www.waferstar.com 

INSTALLATION 

To install the GSM-RELAY, you need to power on the board with AC/DC 9V-24V. and also 

connect the relay output according to your project. The relay contacts can stand 

230V 10A 

maximum

, this is enough for its operation but 

don't try to switch higher voltages or currents

You should install the GSM-RELAY in a place where there is GSM signal coming from the 
operator you want to use. Check it with a phone before proceeding with the installation. If you 
need to install the device in a place with little signal, you may consider using an external antenna 
that we may supply as an option to be purchased separately with 3m cable. 

You should then insert the SIM Card of the operator you want to use with the right direction 

according to the following pictures. 

!Note! : You must remove the PIN request from the SIM before inserting it in the unit

otherwise the device will not work. In order to do so, insert the SIM in a phone and disable the 
PIN request (usually there is a security menu that enables you to do so). 

 

 
 
 
 
 

WAFER GSM-RELAY PROGRAMMING 

You can program the GSM-RELAY with SMS commands using your phone. It is safe to do 

so because in addition to the fact that other people may not know the number of the SIM inserted 
in it, we also use a Password that makes it impossible for anybody who doesn't know it to access 
the system by chance. 

Remember that commands must be CAPITAL LETTERS. It is PWD not pwd, CAP not Cap 

etc. Don't add spaces or any other character. 

The below wire picture is to show how to connect the cable to the PC program connector with 

the Program adapter.Please connect it in the right direction with the picture. 

 

 
 
 
 
 
 
 

1.Slide back the SIM door and lift it up 
2.Slide the SIM Card into the SIM door making sure that the clipped corner of the SIM card 

lines up with the clipped corner of the SIM holder 

3.Close the SIM door 
4.Slide the SIM door to lock the SIM card in place 

Содержание GSM-RELAY













Отзывы: