Mounting the LCD monitor
PerfectView M70L
26
➤
Hold the monitor bracket within the outlines marked beforehand and mark four
different drilling points.
➤
Drill 2 mm diameter holes at the points you just marked.
➤
Screw on the monitor bracket with the 4 x 20 mm self-tapping screws.
➤
Slide the monitor (
1
) onto the mounting plate of the monitor bracket (
2
) and
secure it on the monitor bracket with the knurled screw (
3
).
I
Note
You can now adjust the angle of inclination. To do this, loosen the knurled
screw (
4
) and tilt the monitor to the desired position. Tighten the knurled
screw (
4
).
6.3
Connecting the monitor to an electricity supply
The circuit diagram for the LCD monitor can be found in fig.
b
, page 7.
No. in
fig.
b
, page 7
Description
1
Monitor
2
9-pin Mini-DIN plug
3
Connection cable
4
9-pin Mini-DIN socket
5
12 V positive cable (red): Connection to the positive pole of the
voltage source
6
Earth cable (black): Connection to the negative pole of the volt-
age source
7
6-pin Mini-DIN socket (connection to video source 1)
8
6-pin Mini-DIN socket (connection to video source 2)
9
Cable (green): Control input for the connection to the reversing
lights
10
Cable (violet): Control input for inverting the picture
(Camera: RV-24/N, RV-27/N, RV-30K, RV-30K-F)
_RV-71_EB_10s.book Seite 26 Freitag, 2. Februar 2007 1:21 13
