Rectifying faults
PerfectPower
26
10
Rectifying faults
11
Guarantee
The statutory warranty period applies. If the product is defective, please
return it to the WAECO location in your country (see the back of the
instruction manual for the address) or to your dealer. For repair and
guarantee processing, please include the following documents when you
send in the device:
z
A copy of the receipt with purchasing date
z
Reason for the claim or a description of the fault
Fault
Cause
Remedy
No output voltage
No contact to the battery
Check contact and cable.
Switch on the ignition if
necessary.
PP152/PP154:
Check the
12/24 V socket and replace it
if necessary.
No output voltage
Overheating
Switch off power consuming
devices.
Let the inverter cool down
and ensure better ventilation.
No output voltage
Defective fuse (in the inverter
or the vehicle)
Replace the the fuse with one
of the same specifications.
No output voltage
Device defective
Replace the device.
The device switches on and
off repeatedly
Excessive constant load
Reduce the load.
The inverter switches off
when the consumer is
switched on
Starting current too high
Compare the device power
with the maximum power of
the inverter.
The output voltage is too
low.
Batter voltage below 10.8 V
(PP152/PP402/PP602) or
21,5 V (PP154/PP404/PP604)
Charge the battery (start the
engine).
_PP150_PP400_PP600.book Seite 26 Donnerstag, 12. November 2009 2:25 14
More information https://www.caravansplus.com.au
