Waeco PerfectPower PP150, Инструкция по эксплуатации

Страница: 9 / 44

9
Error detection
Error
No output voltage
Alarm tone during the
operation
Unit switches On/Off cyclically
The inverter switches off when
the power consuming unit is
switched on.
Cause
The cigarette lighter is
switched on via the ignition
Battery voltage is smaller than
10 V (815-012PP) or 20 V
(815-024PP)
Thermal overload
Fuse is defective (in the
inverter or in the vehicle)
Battery voltage is under
10.7 V (815-012PP) or
21.4 V (815-024PP)
Poor contact in the cigarette
lighter mains socket with load
Permanent load is too high
Switch-on current is too high
Troubleshooting
Turn on the ignition
Load battery(start motor)
Switch off power consuming
unit let inverter cool down and
provide for better ventilation
Fuse to be replaced by a
qualified electrician
Charge battery
Cleaning the contacts
Reduce load
Comparison of the unit
capacity with the maximum
capacity of the inverter
Technical data
Article No. 815-012PP 815-024PP
European plug Safety plug/UK version European plug Safety plug/UK version
input nominal voltage: 10 V~15 V +/- 0.3 V 20 V~30 V +/- 0.6 V
permanent output capacity(> 4 hrs.): 140 W 140 W
permanent output capacity (30 min.): 150 W 150 W
peak output capacity (0.1 sec.): 300 W 300 W
output voltage: 210-230 V AC 210-230 V AC
output frequency: 50 Hz 50 Hz
efficiency with nominal output: 90 % 90 %
no-load current consumption: <0.15 A <0.15 A
maximum ambient temperature: 40 °C 40 °C
dimensions W x H x D (mm): 105 x 57 x 140 103 x 65 x 150 105 x 57 x 140 103 x 65 x 150
weight: 0.6 kg 0.65 kg 0.6 kg 0.65 kg
Subject to changes due to technical progress and availability.
Information! The output voltage of this rectangle inverter can be measured only correctly with an analog indicator
(pointer instrument).
Collected_MB-815_rev1_q6.qxd 08.06.2004 16:08 Uhr Seite 9