Safety instructions
SinePower
36
2.1
General safety
z
During construction of a 230 V
AC
socket distribution circuit, it is absolutely
essential to have a circuit breaker (residual current circuit breaker) in-
stalled and a grounding bridge set by a trained professional, see chapter
“Connect multiple appliances” on page 48.
z
Electronic devices are not toys!
Keep electrical appliances out of reach from children or infirm persons. Do
not let them use the appliances without supervision.
z
Persons (including children) whose physical, sensory or mental capabili-
ties or lack of experience and knowledge prevents them from using the
appliance safely should not use this appliance without initial supervision
or instruction by a responsible person.
z
Use the device only as intended.
z
Do
not
operate the device in a damp or wet environment.
z
Do not operate the device near any flammable materials.
z
Do not operate the device in areas that are potentially explosive.
z
Maintenance and repair work may only be carried out by qualified person-
nel who are familiar with the risks involved and the relevant regulations.
2.2
Safety when installing the device
z
Ensure the device is standing firmly.
The device must be set up and fastened in such a way that it cannot tip
over or fall down.
z
Take the precautions necessary to ensure that children cannot interfere
with operation. Dangerous situations may occur which cannot be recog-
nised by children!
z
Do not expose the device to a heat source (such as direct sunlight or heat-
ing). Avoid additional heating of the device in this way.
For installation on boats
z
If electrical devices are incorrectly installed on boats, corrosion damage
might occur. Have the inverter installed by a specialist (marine) electri-
cian.
_MSP702_MSP2524.book Seite 36 Montag, 23. Mai 2011 4:53 16
