Waeco MagicSafe MS150, Инструкция по установке и эксплуатации

Страница: 30 / 208

Depending on the vehicle’s equipment,the following date may have to
be reprogrammed:
Radio code · Clock · Timer · Board computer · Seat position
Instructions on how to reset these can be found in the relevant
operating instructions.
Warning! The components of the MAGIC SAFE MSK-150 which
are inside the vehicle must be securely fixed so that they cannot
come loose and injure the vehicle’s occupants under any
circumstances (emergency braking, traffic accident).
If the siren beeps are enabled on arm and disarm this will
not comply with the 95/56/EC regulations.
If the voltage detection is also switched on, this will also
not comply with 95/56/EC regulations.
30
Safety and installation instructions
Caution! To check the voltage in electric cables, use only a
diode test lamp (see A 1) or a voltmeter. (see A 2)
Test lamps (see A 3) which light up take too much current and
the vehicle electronics may be damaged.
Caution! To avoid damage, always ensure that there is enough
clearance for the drill bit to emerge. (see A 4)
Every drill hole must be deburred and treated with a rust
proofing agent.
MSK-150_09092003.qxd 16.03.2004 8:19 Uhr Seite 30