Waeco AirCon ASC 6100G, Руководство по эксплуатации

Страница: 26 / 188

English
5.
Set the
Pressure increase Test time
to
1
.
6.
Press
ENTER
to confirm.
7.
Deselect
Vacuum phase
using
No
.
8. Press ENTER to confirm.
9. Deselect
Filling phase
using
No
.
10. Press ENTER to confirm.
11. Select
Process start
.
12. Press ENTER to confirm.
The service hoses will now be drained and the A/C service unit's basic menu will be activated. The com-
pressor has produced a slight internal vacuum so that the filter can be replaced with minimal refrigerant
loss.
13. Switch off the A/C service unit.
14. Pull out the power supply plug.
15.
CAUTION! Health hazard
The following steps may only be performed by authorized personnel.
Wear protective gloves and goggles.
Unscrew the screw (D) from the holder, and pull the dryer filter straight out.
16. Replace the O-rings (E). Moisten new O-rings with refrigerant oil before installing.
17.
Insert the new dryer and tighten the screw to max. 15 Nm.
18.
Reconnect the power plug.
19.
Switch on the A/C service unit.
The inverter performs a self-test.
20. Reset the
R1234yf from system
counter ( Resetting the counters on page 23).
21.
Perform a leak test ( Leak test on page 22).
24