Wadkin Bursgreen WB800H, Руководство пользователя, Страница: 9 / 27

7
UNPACKING
The Heavy-Duty Bandsaw is shipped from the
manufacturer in a carefully packed crate. If you
discover the machine is damaged after you have
Lifts out the bandsaw from crate with crane or
forklift.
signed for delivery, please call Customer Service
Clean Up
immediately for advice. When you are completely
satisfied with the condition of your shipment, you
should inventory its parts.
The unpainted surfaces are coated with a oil to
protect them from corrosion during shipment.
The Heavy-Duty Bandsaw Is a
heavy machine. DO NOT over-
exert yourself while unpacking or
moving your machine you will
need assistance and power
equipment. Serious personal
injury may occur if safe moving
methods are not followed.
Some metal parts may have sharp
edges on them after they are formed.
Please examine the edges of all metal
parts before handling them. Failure to
do so could result in injury.
Remove this protective coating with a solvent
cleaner or citrus-based degreaser. To clean
thoroughly, some parts may need to be removed.
For optimum performance from your machine,
make sure you clean all moving parts or sliding
contact surfaces that are coated. Avoid chlorine-
based solvents as they may damage painted
surfaces should they come in contact.
Do not use gasoline or other
petroleum-based solvents to clean
with. They have low flash points which
make them extremely flammable. A
risk of explosion and burning exists if
these products are used.
Piece Inventory
After all the parts have been removed from the
carton, you should have:
– Bandsaw Unit with Blade
– Table
– Fence Rail
– Fence
– Dust Port
– Miter Gauge
– Push Stick w
/
Hold Pin
– Hardware Bag
(1) Lift Ring
(1) Hex Nut M10
(1) Flat Washers 10mm
(1 set) 3mm,4mm,5mm,6mm
“L” Wrench
To mount the lift ring
Firstly, mount the lift ring( A ) on the upper body of
bandsaw with Hex Nut M10 & Washer 10mm.
Many of the solvents commonly used
to clean machinery can be toxic when
inhaled or ingested. Always work in
well ventilated areas far from potential
ignition sources when dealing with
solvents. Use care when disposing of
waste rags and towels to be sure they
do not create fire or environmental
hazards.