Wadkin Bursgreen WB800H, Руководство пользователя, Страница: 16 / 27

Note: It may be necessary to tap the
threaded section of the shaft with a soft
faced mallet to remove the drive wheel.
Place the new drive belt over the pulley on the
main drive-wheel.
Re-fit the drive-wheel to the saw and fully tighten
the lock nut to secure.
Follow the instructions to re-fit the blade and to
re-tension the drive belt.
Cleaning:
Caution! Before cleaning or carrying out
maintenance work, disconnect the machine
from the power source (wall socket). Never
use water or other liquids to clean the
machine. Use a brush. Regular
maintenance of the machine will prevent
unnecessary problems.
Always remove excess chips and waste debris
from the band-saw, pay particular attention
around the motors air inlets, failure to do so
could result in overheating and even fire.
Periodically clean and lubricate the internal
moving parts of the band-saw such as the rack
and pinion blade guide assembly, belt tension
screw, table tilting assembly and the belt
tension assembly to ensure easy accurate
adjustments.
WIRING DIAGRAM
WARNING!
This machine must be grounded.
Replacement of the power supply cable should only be done by a qualified electrician.
QS Power switch
SB1 Stop button w/Emergency stop
SB2 Start button
SQ1 SQ2 Limit switch
KM Contactor
FR Thermo protector
FU1 FU2 FU3 Fuse 2A
HL1 Power on light
HL2 Run light
TC Transformer
14
V
A2