Page 47
USING THE LENS CURSOR
The Intuos Lens Cursor is an ergonomic input device that allows you to enter precise coordinate position
information into your computer. The Lens Cursor reports the position of the cross-hair to the computer.
This makes the Lens Cursor especially useful for tracing and digitizing drawings into graphics and CAD
applications. By default, the Lens Cursor is set to M
OUSE
M
ODE
, which means you can position the screen
cursor like you do with a regular mouse. When using the Lens Cursor to digitize a drawing, the Lens
Cursor must be set to P
EN
M
ODE
.
Refer to
Customizing the 4D Mouse and Lens Cursor
for information on programming the Lens Cursor
buttons.
Left-Click Button
Middle-Click Button
Right-Click Button
Rotate lens for best viewing angle.
Rear Buttons (defaults are left double-click)
Important: When the Lens Cursor is
not in use, place it on your desk.
Leaving an Intuos tool on the tablet may
interfere with screen cursor positioning
when using other pointing devices.
