Page 126
When using the tablet the
screen cursor is very erratic or
jumps around.
Certain monitor settings can generate RF noise that interferes with
the tablet. If you notice screen cursor jitter, try the following:
•
Move the tablet about 12 inches away from the monitor.
•
Change the refresh rate or monitor resolution.
•
You can also set the tablet to operate at a different frequency by
selecting S
INGLE
M
ODE
. For serial tablets this option is located on
the C
ONNECTION
tab. For USB tablets it is located on the T
ABLET
M
ODE
tab.
Cannot move the cursor where
you want to on the screen, or
the line you are drawing does
not line up with the location of
the pointer in paint
applications.
Open the Wacom control panel and go to the M
APPING
tab. Verify that
P
EN
M
ODE
is selected and that the D
ISPLAY
A
REA
is set to E
NTIRE
D
ISPLAY
for the selected tool and application. If this does not help,
click on the R
ESET
T
AB
TO
D
EFAULTS
button to reestablish tablet to
screen mapping.
If this does not work, open the Windows folder and delete the
WACOM.DAT file. Then restart your computer. When the tablet driver
loads, it will create a new preferences file with the factory default
settings.
