Wacom DTF-521 series Скачать руководство пользователя

Страница: 5 / 60

Precautions

Page 3

USAGE

HANDLING

ARNING

Only use the power adapter that came with the DTF-521

. If a different type of power

adapter is used, the DTF-521 will not work properly or may be damaged.

Using a different

type of power adapter also has the potential to result in fire.

Use of a different power

adapter will void your warranty.

AUTION

Be sure to use a grounded power source when applying power to the DTF-521.

AUTION

Do not connect or disconnect the video or power cables while the DTF-521 or your
computer are turned on;

this may damage the display or computer video card. In this case,

Wacom shall have no responsibility to repair or replace the product.

AUTION

This product is for use with a VGA video card;

using an inappropriate video card may

damage the DTF-521.

AUTION

Do not block the rear panel ventilation holes;

this may overheat and damage the unit.

When not using the DTF-521 for long periods of time, unplug the power adapter from
the AC outlet.

ARNING

High Voltage. Do not open or disassemble the DTF-521 pen display. There is a risk of
electrical shock when the casing is open.

This will also void your warranty and Wacom

shall have no responsibility to repair or replace the product.

ARNING

If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking
from it;

this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse

immediately with running water for at least 15 minutes or more. If contact is made with the
eyes or mouth, also consult a physician.

ARNING

– LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE

RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL
LAWS.

The DTF-521 pen display has a backlight which contains mercury (Hg).

Be sure to

dispose of properly, and to manage any disposal of this unit in accordance with your local
ordinances and laws.

ARNING

Prevent children from swallowing the pen tip or side switch.

The pen tip or side switch

may accidentally be pulled out if children are biting on them.

AUTION

Do not disassemble the pen.

This may cause the device to malfunction. In this case,

Wacom shall have no responsibility to repair or replace the product.

AUTION

Do not scratch the display screen.

Avoid placing sharp objects on the display screen

surface.

AUTION

When adjusting the tilt angle of the pen display, be careful to avoid catching your
finger in the gap of the movable portion of the stand.

AUTION

Do not lift the DTF-521 by the stand; this may damage the stand mechanism.

When lifting or moving the pen display, always do so by grasping the main body casing.

AUTION

Avoid intensive shock or vibration to the DTF-521 or the pen.

Hitting or dropping the pen

display may damage the display screen or other components.

DTF521_Manual.fm Page 3 Thursday, October 25, 2007 3:46 PM

Содержание DTF-521 series





























































Результаты поиска

Содержание DTF-521 series

Отзывы:

Похожие инструкции для DTF-521 series

Бренды по названию

Популярные бренды

Wacom DTF-521 series, Руководство по установке и инструкция пользователя

Результаты поиска

Содержание DTF-521 series

Отзывы:

Похожие инструкции для DTF-521 series

Бренды по названию

Популярные бренды