Wacom CINTIQ 21UX DTK-2100, Руководство по установке

Страница: 55 / 340

Troubleshooting
Page 51
The eraser selects everything or will
not stop erasing. Open the Wacom Tablet control panel and go to the E
RASER
tab. Move the E
RASER
F
EEL
slider toward F
IRM
, or select the
D
ETAILS
... button and increase the C
LICK
T
HRESHOLD
setting.
If this does not help, see “Testing Cintiq” on page 42.
You notice a delay at the beginning
of pen or inking strokes. Open the Wacom Tablet control panel and go to the P
EN
tab.
Try decreasing the T
IP
D
OUBLE
C
LICK
D
ISTANCE
. If that does
not work, try dragging the T
IP
D
OUBLE
C
LICK
D
ISTANCE
slider
to the O
FF
position in order to turn off double-click assist.
You have to press hard with the
pen when clicking, drawing, or
writing. Open the Wacom Tablet control panel and go to the P
EN
tab.
Move the T
IP
F
EEL
slider toward S
OFT
, or select the D
ETAILS
...
button and decrease the S
ENSITIVITY
and C
LICK
T
HRESHOLD
settings.
The pen tip does not function. Be sure you are using the pen that originally came with your
interactive pen display, or an Intuos4 pen which has a part
number ending in “-01”. Other pens may not function
properly on the pen display.
Check the control panel’s P
EN
tab and verify that the tip is
assigned to a C
LICK
function.
Make sure the status LED lights blue when the pen tip is
pressed. If the LED does not light, verify that the USB cable
is plugged into an active USB port on your computer or on a
USB hub.
If the LED still does not light, you may have defective
hardware (see “Troubleshooting” on page 42).
Changing the function settings for
an input tool has no effect. Make sure that you change the settings for the tool and
application that you are using. See the electronic Software
User’s Manual for details on working with multiple tools and
with application-specific settings.
21UX_Monet_Manual.fm Page 51 Tuesday, January 19, 2010 9:15 AM