Wacker Neuson RT82-SC3, Руководство оператора

Страница: 51 / 180

wc_tx003863gb_FM10.fm
51
RT / RTx Operation
e Near field transmitting
diodes (LEDs) These LEDs—located on all sides of the
transmitter—are part of the machine’s sensing
system which stops the machine when the
operator and transmitter are located too close to
the machine.
f Operating status indicator This LED indicates the operating status of the
transmitter.
See Operating Status Indicator Codes .
h Engine START
pushbutton Pressing this button causes the engine to crank.
An override prevents the engine from cranking if it
is already running.
j ON/OFF pushbutton Pressing this button turns on and off the
SmartControl™ transmitter. The operating status
indicator
(f) illuminates green (flashing) when the
transmitter is on.
Turning the transmitter off stops the engine and the
machine. See topic 4.25
Emergency Shutdown
Procedure .
k LOW vibration pushbutton Pressing this button causes the vibration to come
on in the LOW vibration mode.
l Vibration OFF pushbutton Pressing this button causes all vibration to stop.
m HIGH vibration
pushbutton Pressing this button causes the vibration to come
on in the HIGH vibration mode.
— Vibration pushbuttons When the machine is moving in the high speed
travel mode, pressing either vibration pushbutton
(k or m) causes the roller to drop out of the high
speed travel mode and into the low speed travel
mode. Conversely, when the vibration is on, the
machine cannot go into the high speed travel
mode.
n Signal transmission
indicator To aid in diagnostics, this green LED flashes any
time a signal is sent to the roller.
o Control channel selector
switch This selector switch, when set to match that of the
machine’s decoder module, allows the
SmartControl to control the roller.
Ref Component Description