manualshive.com logo in svg

Wacker Neuson RT82-SC3, Руководство оператора

Поделиться
Скачать
Wacker Neuson RT82-SC3 Скачать руководство пользователя страница 38

 wc_tx003862gb_FM10.fm

38

Lifting and Transporting

RT / RTx

3.2

Lifting the Machine

Requirements

■

Lifting equipment (crane or hoist) capable of supporting the machine’s weight 

■

Lifting hooks and chains capable of supporting the machine’s weight

■

Engine stopped

Procedure

A lifting eye is used for lifting the machine.

Perform the procedure below to lift the machine.

1. Lock the front and rear halves of the machine using the articulated joint locking 

bar 

(a)

.

2. Attach the lifting devices and equipment to the lifting eye. Do not attach lifting 

devices to any other part of the machine.

3. Lift the machine a small distance.

4. Check for stability. If the machine is not stable, lower it, reposition the lifting 

devices, and lift the machine a small distance again. 

5. Continue lifting the machine as necessary.

  

  

wc_gr012167

a

WARNING

Crushing hazard. An unstable machine may cause the lifting devices and 

equipment to fail. You may be crushed if the lifting devices and equipment fail. 

►

Check for stability before continuing. 

Содержание RT82-SC3





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды