Wacker Neuson G 14, Руководство оператора

Страница: 53 / 68

G 14 Maintenance
wc_tx001169gb.fm
53
6.6 Checking the Engine Coolant Level
Prerequisites Machine shut down
Engine cool
When Daily
l
Procedure Follow the procedure below to check the engine coolant level.
1. Open the access cover on the roof (a).
2. Open the radiator filler cap slowly in order to relieve the pressure. Remove the
filler cap after the pressure has been released.
3. Verify that the coolant level of the radiator is 19 mm (3/4 in.) below the bottom of
the filler neck. Add more coolant if necessary to maintain this level.
4. Check the coolant level in the reserve tank (b) . Ensure that the coolant level is
between the FULL (d) and LOW (e) marks. If the level is low, add coolant.
5. Inspect the radiator filler cap and filler cap seal for damage. Clean the radiator
filler cap or replace it if necessary.
6. Re-install the radiator filler cap.
NOTICE: Solutions of antifreeze and supplemental coolant additives MUST be
used year-round. Automotive-type coolants do not contain the correct coolant addi-
tives to protect heavy-duty diesel engines. They often contain a high concentration
of silicates which can damage the engine and cooling system.
Important Use a long-life ethylene glycol coolant in this engine. Refer to engine operator’s
manual for more information.
WARNING
Burn hazard. Engine coolant is hot and under pressure at operating temperature. It
can cause severe personal injury.
f
Check the coolant level only after the engine has been shut down and is cool.
wc_gr006216
c
b
d
e
a
WARNING
Burn hazard. Coolant can contain alkali.
f Avoid coolant contact with skin and eyes.