Wacker Neuson G 14 страница 7 Скачать руководство пользователя

Страница: 7 / 68

G 14

Safety Information

wc_si000337gb.fm

Safety Information

1.1

Signal Words Found in this Manual

This manual contains DANGER, WARNING, CAUTION,

NOTICE,

and NOTE

signal words which must be followed to reduce the possibility of personal injury,
damage to the equipment, or improper service.

NOTICE:

Used without the safety alert symbol, NOTICE indicates a situation

which, if not avoided, could result in property damage.

Note:

A Note contains additional information important to a procedure.

This is the safety alert symbol. It is used to alert you to potential personal hazards.

Obey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death

or serious injury.

To avoid death or serious injury from this type of hazard, obey all safety messages that
follow this signal word.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

To avoid possible death or serious injury from this type of hazard, obey all safety mes-
sages that follow this signal word.

CAUTION!

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

To avoid possible minor or moderate injury from this type of hazard, obey all safety mes-
sages that follow this signal word.

Содержание G 14





































































Результаты поиска

Содержание G 14

Отзывы:

Похожие инструкции для G 14

Бренды по названию

Популярные бренды

Wacker Neuson G 14, Руководство оператора

Результаты поиска

Содержание G 14

Отзывы:

Похожие инструкции для G 14

Бренды по названию

Популярные бренды