Wacker Neuson G 100, Руководство оператора

Страница: 14 / 98

Safety Information G 100 / G 120
14
wc_si000291gb.fm
1.3.10 Do not start a machine in need of repair.
1.3.11 Use the emergency stop button only in an actual emergency. Do not
restart the engine until the cause of the trouble has been determined
and fixed.
1.3.12 Wear hearing protection when operating equipment.
1.3.13 Follow starting and stopping instructions described in this manual.
Know how to operate and stop generator before starting it.
1.3.14 Make a walk-around inspection of the generator set before starting it.
Open side doors and visually inspect engine compartment for obvious
damage or the presence of foreign objects which might affect
operation.
1.3.15 Keep the machine at least one meter (three feet) away from
structures, buildings, and other equipment during use.
1.3.16 Store the machine properly when it is not being used. The machine
should be stored in a clean, dry location out of the reach of children.
1.3.17 Keep the area immediately surrounding and underneath the machine
clean, neat, and free of debris and combustible materials. Make sure
that the area overhead is clear of debris that could fall onto or into the
machine or exhaust compartment.
1.3.18 Make sure the machine is on a firm, level surface and will not tip, roll,
slide, or fall while operating.
1.3.19 Remove all tools, cords, and other loose items from the generator
before starting it.
1.3.20 Make sure the machine is well-grounded and securely fastened to a
good earthen ground per national and local regulations.
BACKFEED FROM THE GENERATOR INTO THE PUBLIC POWER
DISTRIBUTION SYSTEM CAN CAUSE SERIOUS INJURY OR
DEATH TO UTILITY WORKERS!
Improper connection of generator to a building’s electrical system can
allow electrical current from the generator to backfeed into utility lines.
This may result in electrocution of utility workers, fire, or explosion.
Connections to a building’s electrical system must be made by a
qualified electrician and comply with all applicable laws and electrical
codes.
If connected to a building’s electrical system, the generator must meet
the power, voltage, and frequency requirements of the equipment in
the building. Differences in power, voltage, and frequency
requirements may exist and improper connection may lead to
equipment damage, fire, and personal injury or death.
WARNING