Wacker Neuson EZ38 Скачать руководство пользователя страница 74

Страница: 74 / 254

4-26

OM EZ38 us 1.1 * ez38i400.fm

Protective Front Guard structure level I (option)

DANGER

Crushing hazard by objects from the front!

Will cause severe injury or death.

►

Install a protective Front Guard structure in areas with hazard from the
front, for example pipes, tree trunks etc.

►

Machine operation is prohibited without a protective Front Guard
structure.

Information

The protective Front Guard structure corresponds to level I according to
ISO 10262:1998.

►

The machine owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.

►

The machine owner must ensure that only work is performed that does
not require any higher protection.

►

Accidents cannot be fully avoided despite equipping a machine with
protective structures.

Installing

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Remove all lights and mirrors (option).
3. A minimum 2 persons are required for installing/removing.
4. Install the lock nuts and screws on either side.

5. Mounting point for protective structure:

(upper).

Fig. 91

Fig. 92

Содержание EZ38































































































































































































































































Результаты поиска

Содержание EZ38

Отзывы:

Похожие инструкции для EZ38

Бренды по названию

Популярные бренды

Wacker Neuson EZ38, Руководство оператора

Результаты поиска

Содержание EZ38

Отзывы:

Похожие инструкции для EZ38

Бренды по названию

Популярные бренды