Wacker Neuson EZ38 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 254

background image

2-2

OM EZ38 us – 1.1* * Sicherheit(us).fm

Information

Information

identifies an instruction that, when followed, provides for a

more efficient and economical use of the machine

.

Environment

Failure to observe the instructions identified by this symbol can result in
damage to the environment. The environment is in danger if
environmentally hazardous material, such as waste oil, is not subject to
proper use or disposal.

2.2

Warranty

Warranty claims must be submitted to your Wacker Neuson dealer only.

2.3

Designated Use

1. In accordance with its designated use, the machine may be used

ONLY for moving earth, gravel, coarse gravel or ballast and rubble. It
may also be used for working with the attachments approved in the
“Fields of Application” chapter.

2. No other applications are designated for the use of the machine.

Wacker Neuson will not be liable for damage resulting from use other
than mentioned above. The operator alone will bear the risk.

3. “Designated use” also includes observing the instructions set forth in

this Operator’s Manual and observing the maintenance schedule.

4. Machine safety can be negatively affected by performing machine

modifications without proper authority and by using spare parts,
equipment,
attachments and optional equipment which have not been checked
and released by Wacker Neuson. Wacker Neuson will not be liable for
damage resulting from unapproved parts or unauthorized
modifications.

5. Wacker Neuson shall not be liable for personal injury and/or damage to

property caused by failure to observe the safety instructions on labels
and in this Operator’s Manual, and by the negligence of the duty to
exercise due care when:

• transporting the machine
• operating the machine
• servicing the machine and performing maintenance on or with the

machine

• repairing the machine
This is also applicable when special attention has not been drawn to the
duty to exercise due care.

1. Read and understand this Operator’s Manual before starting, moving,

operating, servicing or repairing the machine. Observe all safety
instructions.

2. The machine shall NOT be used for transport jobs on public roads!

«
...
12
13
14
15
16
...
»

Содержание EZ38































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EZ38

PC600-8R BACKHOE

Бренд: Komatsu Страницы: 10

Бренд: Takeuchi Страницы: 447

Бренд: Eurotrac Страницы: 131

Бренд: CNH Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды