Wacker Neuson ET16 Скачать руководство пользователя | Manualshive

Страница: 24 / 248

background image

2-10

BA ET16 de* 1.0 * Safety_01_0.fm

2 Safety

2.6

Trailer operation

Trailer operation

• The machine must be certified for trailer operation.
• Observe the national regulations for trailer operation.
• The specific national driving license is required.
• Carrying passengers on/in trailers is PROHIBITED.
• Observe the maximum permissible vertical and trailer load.
• Do not exceed the permissible trailer speed.
• Trailer operation with the towing gear of the machine is prohibited.
• Trailer operation changes the machine’s operating behavior, the

operator must be familiar with this and act accordingly.

• Bear in mind the machine’s steering mode and the trailer’s turning

circle.

• Before hitching/unhitching the trailer, secure it to prevent it from rolling

away (for example with the parking brake, suitable wheel chocks).

• There must be nobody between the machine and the trailer when

hitching a trailer.

• Hitch the trailer onto the machine correctly.
• Ensure that all equipment works correctly (for example the brakes,

lights).

• Before starting machine travel, ensure that nobody is between the

machine and the trailer.

2.7

Attachment operation

Attachments

• Use only attachments that are certified for the machine or its protective

equipment (for example a shatter protection).

• All other attachments require the machine manufacturer’s release.
• The danger zone and the work zone depend on the attachment used –

see the Operator’s Manual of the attachment.

• Secure the load.
• Do not overload attachments.
• Check the correct position of the lock.

Operation

• Carrying persons on/in an attachment is prohibited.
• Installing a work platform is prohibited.

- Exception: The machine is certified and equipped with the necessary

safety equipment.

• Attachments and counterweights modify handling, as well as the

steering and braking capability of the machine.

• The operator must be familiar with these modifications and act accord-

ingly.

• Before starting work, operate the attachment to check that it works

correctly.

• Before putting the attachment into operation, ensure that nobody is in

danger.

• Lower the attachment to the ground before leaving the operator seat.

«
...
22
23
24
25
26
...
»

Содержание ET16

























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ET16

Бренд: SMORACY Страницы: 29

Бренд: achilles Страницы: 28

Бренд: SANY Страницы: 196

Бренд: Daewoo Страницы: 658

Бренд: Woods Страницы: 60

Бренд: SUNWARD Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды