Wacker Neuson ET16 страница 27 Скачать руководство пользователя

Страница: 27 / 248

BA ET16 de* 1.0 * Safety_01_0.fm

2-13

Safety 2

Transportation

• For the safe transportation of the machine:

- The transport vehicle must have a sufficient load capacity and

platform – see “Technical data”

- The maximum weight rating of the transport vehicle must not be

exceeded.

• Use only lifting and fastening gear certified by a test/certification body,

observe the inspection intervals.

• Do not use any lifting and fastening gear that is dirty, damaged or not

of sufficient size.

• In order to secure the machine on the platform, use only the fastening

points provided for this purpose.

• Ensure that nobody is in or on the machine during transportation.
• Observe the national regulations (for example “Merkheft Erdbaumas-

chinen”, leaflet on earth moving machines of the German employers’
liability insurance association for construction engineering).

• Bear in mind the weather conditions (for example ice, snow).
• Ensure the minimum load on the steering axle(s) of the transport

vehicle, and ensure an even load distribution.

2.9

Maintenance

• Observe the intervals prescribed by law and those specified in this

Operator’s Manual for routine checks/inspections and maintenance.

• For inspection and maintenance, ensure that all tools and service

center equipment are adapted to the performance of the task
described in this Operator’s Manual.

• Do not use any damaged or malfunctioning tools.
• Have hydraulic hoses replaced within stipulated intervals even if no

visual defects can be detected.

• The machine and the engine must be stopped during maintenance.
• Once maintenance is over, correctly install safety equipment again that

has been removed.

• Wait for the machine to cool down before touching components.

Содержание ET16

























































































































































































































































Результаты поиска

Содержание ET16

Отзывы:

Похожие инструкции для ET16

Бренды по названию

Популярные бренды

Wacker Neuson ET16, Руководство оператора

Результаты поиска

Содержание ET16

Отзывы:

Похожие инструкции для ET16

Бренды по названию

Популярные бренды