manualshive.com logo in svg

Wacker Neuson ET16, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET16 Скачать руководство пользователя страница 150

5-48

BA ET16 de*   1.0 *  et16b510.fm

 

5 Operation

General information regarding work operation

Machine travel

Performing machine travel over obstacles can put a heavy load on the 
undercarriage and cause damage. Avoid performing machine travel over 
obstacles if possible.
If it cannot be avoided, lower the boom to ground level and travel over the 
obstacle at low speed.

Traveling in speed range 2

Avoid starting machine travel and stopping abruptly as well as changing 
direction suddenly on rough terrain.
The dozer blade must be at the front during travel speed 2.

Operation in water

Water must not reach any further than the upper edge of the tensioning 
wheel.
Lubricate lubrication points again that were immersed in water for a longer 
time in order to expel the old grease.
Do not immerse the live ring and upper carriage in the water.
Operation in salt water is prohibited.

Do not immerse the live ring and upper carriage in the water.

Operation near the sea

Clean the machine regularly when using it in a saline environment.
See chapter 

Cleaning and maintenance

.

Fig. 183

Fig. 184

Fig. 185

Содержание ET16

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды