manualshive.com logo in svg

Wacker Neuson CRT 48-31V, Руководство оператора

Поделиться
Скачать
Wacker Neuson CRT 48-31V Скачать руководство пользователя страница 54

TROWEL BLADES AND PANS

• Do not attempt to clean, service or perform

adjustments on the trowel while it is running.

• Do not remove while the trowel is hanging

overhead. Always support the trowel securely on
a flat, level surface before changing blades or
pans.

• Always handle blades and pans carefully. Worn

blades or pans may develop sharp edges that
can cause serious cuts.

• Always replace worn or damaged parts with

service parts designated by the manufacturer.

• Replace blades and pans as a complete set –

even if only one blade or pan is showing wear or
damage. They can wear differently depending on
different jobs, and a difference in blade size will
damage the finish of the slab surface.

HYDRAULIC SYSTEMS

Hydraulic fluid systems operate under high
pressure. Even a small leak can have enough force
to penetrate the eyes or skin. If injury occurs, seek
immediate medical treatment by a physician
familiar with injuries that are caused by hydraulic oil
escaping under pressure.

Use a piece of wood or cardboard to find hydraulic
oil leaks. Do not use your bare hands.

Wear safety glasses to prevent injuries to the eyes.

PERFORM MAINTENANCE SAFELY

21

Trowel.qxd  11/24/04  10:18 AM  Page 21

Do you understand this AEM manual and items
such as –

• Your safety program?

• Your trowel manufacturer’s manual(s)?

• Proper clothing and personal safety equipment?

• Your trowel’s controls, warning signs and

devices, and safety equipment?

• Proper trowel lifting and moving procedures?

• How to inspect and start your trowel?

• How to check your trowel for proper operation?

• Proper working procedures?

• Proper shut down procedures?

• Your work area and any special hazards that

may exist?

• Under what conditions you should not operate

your trowel?

If you do not understand any of these items,
consult with your supervisor before operating your
trowel.

TEST YOUR KNOWLEDGE

22

Trowel.qxd  11/24/04  10:18 AM  Page 22

Содержание CRT 48-31V



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды