Wacker Neuson CRT 48-31V, Руководство оператора

Страница: 29 / 58

CRT 48-31V Maintenance
wc_tx000142gb.fm
27
5.3 Control Linkage Lubrication
The drive system, gearbox and pitch posts are equipped with several
grease fittings. Grease these fittings once a week, or every 20 hours,
to prevent wear.
Use a general purpose grease and add one to two shots of grease at
each fitting.
5.4 Control Arm Adjustment (Forward or Backward)
See Graphic: wc_gr002339
The control arms should line up evenly. If arms appear out of
adjustment, they can be re-adjusted forward or backward as follows:
5.4.1 Loosen jam nuts (b) .
5.4.2 Turn the vertical linkage (a) as follows:
• Extend the linkage to adjust control levers forward.
• Shorten the linkage to adjust control levers backward.
5.4.3 After the arms have been adjusted to the desired position, tighten jam
nuts
(b) .