Wacker Neuson CRT 48-31V, Руководство оператора

Страница: 21 / 58

CRT 48-31V Operation
wc_tx000141gb.fm
19
See Graphic: wc_gr000250
Control locations and functions:
The Riding Trowel features a seat with an integrated “operator
presence” system, which works in conjunction with a throttle mounted
switch. This system allows the engine to remain running (idling) with
no operator seated in the seat, as long as the throttle is not depressed.
This system meets all safety requirements and eliminates the need for
a foot-operated “kill switch”.
To familiarize a new operator with the Riding Trowel the following
steps should be taken:
4.2.1 With the operator in the seat, show him or her the functions of the
control arms
(c)
and how to start the machine.
4.2.2 Have the operator practice steering the trowel. A hard concrete slab
slightly wetted with water is an ideal place for an operator to practice
with the machine. For this practice, pitch the blades up approximately
¼" on the leading edge. Start by making the machine hover in one
spot, and then practice driving the machine in a straight line and
making 180° turns. The
best control is achieved at full rpm.
Ref. Description Ref. Description
a right pitch control o engine choke control
b water tank q work light switch
c control arms r DC accessory outlet
d operator’s seat with “operator pres-
ence” switch s engine keyswitch
e left pitch control t hour meter
f rear work light (one each side) u water spray control
g control panel v oil pressure indicator light
h fuel tank w alternator charging indicator light
m work light (one each side) x coolant temperature indicator light
n foot pedal (throttle control)