Page
12
of
19
Item – Rev(s):
9200000150 & 9200000160 – 101
The machine is capable of turning on the spot by applying equal power to each drive lever in
opposite directions.
Load Frame Lever
To lower the load frame, slowly push the arm lever forward.
To raise the load frame, slowly pull the arm lever backward.
4 in 1 Bucket
The 4 in 1 bucket lever opens and closes the bucket. Push the lever forward to open the
bucket, pull the lever backward to close the bucket. When you let go of the lever it will
return to the centre position and hold the bucket in that current position.
Pump Selector
When faster ground speed and lifting speed is required more than attachment speed and
power, push the pump selector lever to the forward position.
When faster attachment speed and power is required (trenching, post hole digging etc.)
more than ground speed and lifting power, pull the pump selector lever to the rearward
position.
Flow Divider Control
In its normal operating position no flow division is taking place. Moving the lever forward
diverts oil flow to the attachment and less is available to the travel and load frame. This
allows for greater concentration of hydraulic power to the attachment.
The flow divider is mainly used for trenching, rotary hoeing and stump grinding where
greater hydraulic power is required to the attachment and less for ground speed.
Starting the Engine
Stand on the platform and move the auxiliary hydraulics lever to neutral. Follow instruction
on starting the engine as detailed in the engine manufacturer’s manual.
Stopping the Engine
Move the auxiliary hydraulics lever to neutral and the throttle to idle, and turn the key to off.
Refer to the engine manual.
NOTE: if the engine has been working hard or is hot, let it idle for a minute before turning
the ignition key to off. This helps cool the engine before it is stopped. In an emergency,
turning the ignition key to off will stop the engine.
Stopping the Machine
Park on firm, level ground, move the auxiliary hydraulics lever to neutral, the throttle to idle,
lower the load frame to the ground, turn the ignition key to off, remove the key, and chock
the wheels.
Caution:
Remove the key from the ignition while the machine is unattended to avoid
unauthorised and unsafe use.
Содержание 9200000150
Страница 1: ...OPERATION MAINTENANCE MANUAL Mini Loader SM275 20W Item 9200000150 9200000160 Revision 101 SM275 20T...
Страница 8: ...Page 8 of 19 Item Rev s 9200000150 9200000160 101...
Страница 18: ...Page 18 of 19 Item Rev s 9200000150 9200000160 101 Notes...
Страница 19: ...Page 19 of 19 Item Rev s 9200000150 9200000160 101 Notes...
