Wachs DW Guillotine, Руководство пользователя

Страница: 27 / 52

Chapter 3, Operating Instructions: Making the Cut
E.H. Wachs Part No. 29-MAN-10, Rev. A 23
• If you are cutting off the end of the pipe, support the
fall-off piece, or be sure to stand clear of it when it
falls.
• If you are cutting in-line pipe, there may be stress on
the pipe that will cause it to “spring” when cut, or
snap off near the end of the cut. Use appropriate
safety procedures at your worksite for cutting
stressed pipes.
Figure 3-18. Use caution as you approach the end of
the cut.
12.
Finish the cut by feeding the wire past the bottom of
the pipe.
13.
Turn off the water to the coolant sprayer.
14.
Turn the ON/OFF lever to the OFF position.