Wachs DW Guillotine, Руководство пользователя

Страница: 11 / 52

Chapter 1, About the DW Guillotine: Equipment Description
E.H. Wachs Part No. 29-MAN-10, Rev. A 7
Figure 1-6. The tensioning gauge monitors the ten-
sion on the wire as it cuts.
• The indicator should be below the yellow band
when the machine is not in use. Leaving tension on
the wire during storage could damage the wheel
inserts.
• The indicator should be in the yellow band when the
machine is ready for cutting.
• The indicator should be in the green band (as shown
in photo) when cutting. Operate the feed handle to
keep the indicator in the green band.
• If the indicator is in the red band, the tension is too
high. Reduce the feed rate.