70
DMS9648O - User manual
Press
Display
Do
2 “
n
” and
“
m
”
Full scale% value
: enter the
% of full scale value at which
the calibration of upper limit
will be performed.
Value mV/V
: enter the
correct value mV/V of the
sensor.
3 “Ok”
Full scale% value
: confi rm
the selected %.
Value mV/V
: Confi rm the
selected mV/V value.
Visualization will automatically
switch to sensor calibration page
where real-time value read by
the device is visualized.
4 “◊%” and
“◊mV”
Press to go back to settings
of calibration % or to
settings of mV/V value of the
sensor.
Visualization will automatically
switch to the page for the setting
of full scale % or mv/V value.
5 “
m
”
Set the value on minimum.
Place the sensor on its maximum
operating position (related to
Upper limit
).
6 “
n
”
Set the value to maximum
To exit standard procedure
press “Esc”. For zero setting place
the sensor on the zero point
(tare).
7 “>0<”
Set the virtual zero value
Press “Esc” to exit procedure.
Max
Min
Zero