102
DMS9648O - User manual
13.10 Analogue output in mA
Parameters to configure the analogue output in mA
112 Retransmission
Enable analogue output
Disabled (
Default
)
Alarm 2
Process
Remote Ctrl
Alarm 1
113 Signal type
Select the signal for the analogue output in mA
0..20 mA
4..20 mA (
Default
)
114 Lower limit
Analogue output mA lower limit range
-999999..+999999 [Digit
3
],
Default
: 0
115 Upper limit
Analogue output mA upper limit range
-999999..+999999 [Digit
2
]
Default
: 1000
116 Error value
Select the value of the analogue output in mA in case of error
0 mA (
Default
)
4 mA
20 mA
13.11 Serial communication
Parameters to configure the serial communication port.
126 Slave address
Select slave address for serial communication
1..254.
Default
: 240
2
Display of decimal point depends on setting of parameter Decimal point.