MIO-R290GM2011 Rev E
G&B Specialties Inc. 535 West 3
rd
Street, Berwick, PA, USA Tel: (570) 752-5901 Fax: (570) 752-6397
US Field Service: 570-441-6988; CAN Field Service 570-854-0482; www.rafna.com
-96-
O
PERATION
S
AFETY
P
RECAUTIONS
If any operating, services or parts problems are encountered, please call G&B Specialties,
Inc. for technical assistance.
Failure to heed to any of the following warnings could result in severe bodily
injury and/or equipment damage.
Read and understand this manual completely before attempting operation of
the railgear equipped vehicle.
Operating instructions provided below only address the RAFNA railgear
equipment. Applicable railway company procedures and policies must be
adhered to.
Railway company rules governing rail travel must be observed at all times.
Ensure that the position and function of all railgear controls are known before
attempting operation.
Ensure the railgear is locked in road or rail position before starting road or rail
travel respectively.
Ensure all body parts and loose clothing are clear of any moving parts of the
equipment.
If misalignment of the railgear equipment is indicated, promptly perform the
alignment procedure.
Before performing any work under the vehicle or railgear, ensure the engine is
turned off and the parking brake is set.
Never operate the vehicle if the Gross Vehicle Weight Rating (GVWR), Gross
Axle Weight Rating Front or Rear (GAWR), or the wheel or tire load ratings are
exceeded.
!