WABECO CC-D6200 hs, Руководство по эксплуатации

Страница: 9 / 55

9
1. Important safety notes
1.5 Safety features
In order to enable you to work safely with our machines, we have incorporated the following safety
mechanisms. These meet the relevant European safety requirements.
■ Safety cabin
In order fort he machine to operate in CNC mode, the door to the safety cabin must be closed.
■ ON/OFF switch with under-voltage trigger
The ON/OFF switch is fitted with an under-voltage trigger, thus, in the event of a power failure, the
machine does not switch itself back on automatically. This prevents risks caused by the
unexpected motion of the spindle.
■ Emergency off switch
The emergency off switch acts to quickly stop the machine
■ Overload protection
The machine is fitted with an overload protection feature. This overload protection feature
switches the main drive motor off automatically when the machine is overloaded. The machine
can only then be switched on after a waiting period.
■ Switch for operating modes (only for CNC machines)
The mode switch has 3 settings (CNC mode
– Idle position – Manual mode) that can only be
selected with a key. After selecting the mode, the key can be removed in order to prevent a
switching of the mode type by unauthorised persons.
Working in CNC mode is only possible when door is closed. The door is locked as soon as the
main spindle starts. If the door is open, the main spindle cannot be started.
Working in set-up mode can be executed while the door is open. The switch for operating modes
has to be set to set-up mode.
The main spindle can be activated by closed as well as open door.