WABECO CC-D6200 hs, Руководство по эксплуатации

Страница: 32 / 55

32
14. Operational faults and the elimination of such
Operational faults Mögliche Ursache Abhilfemaßnahme
Tool overheated
Revolutions too high Reduce the revolutions
Feed too high Reduce the feed
Working without coolant Use coolant
Insufficient coolant feed at the
cutting edge
Align the coolant hose
correctly
Tool blunt Sharpen tool or use a new tool
Increased friction caused by
shaving build up in the tensioning
groove of the tool (drilling work)
Remove the shavings from the
hole more frequently
(withdraw)
Use a coated tool
Wash the processing area with
coolant
Unsuitable tool chosen for the
material to be processed
Only use the suitable tool for
the relevant material
Tool cannot be removed from
the tailstock sleeve
Tailstock sleeve is not fully
cranked back
Fully crank back the tailstock
sleeve to automatically eject
tools with ejector lugs
Use tool without ejector lugs Place a soft and sufficient wide
inlay between the tool and
tailstock front. Now crank the
tailstock sleeve back to push
the tool out.
(Use of tools without ejector
lugs is possible by screwing a
suitable threaded pin into place
which extends the length of the
tool backwards)