manualshive.com logo in svg

VXI VT1422A, Руководство пользователя


Поделиться
Скачать
background image

Specifications   421

Appendix A

• Thermocouple Type E (-200 - 800 °C), SCPs VT1501/02/03A .   page 423
• Thermocouple Type E (-200 - 800 °C), SCPs VT1508/09A  . . .   page 424
• Thermocouple Type E (0 - 800 °C), SCPs VT1501A/02A/03A.   page 425
• Thermocouple Type E (0 - 800 °C), SCPs VT1508A/09A. . . . .   page 426
• Thermocouple Type E Extended, SCPs VT1501A/02A/03A . . .   page 427
• Thermocouple Type E Extended, SCPs VT1508A/09A . . . . . . .   page 428
• Thermocouple Type J, SCPs VT1501A/02A/03A  . . . . . . . . . . .   page 429
• Thermocouple Type J, SCPs VT1508A/09A . . . . . . . . . . . . . . .   page 430
• Thermocouple Type K, SCPs VT1501A/02A/03A. . . . . . . . . . .   page 431
• Thermocouple Type R, SCPs VT1501A/02A/03A. . . . . . . . . . .   page 432
• Thermocouple Type R, SCPs VT1508A/09A. . . . . . . . . . . . . . .   page 433
• Thermocouple Type S, SCPs VT1501A/02A/03A . . . . . . . . . . .   page 434
• Thermocouple Type S, SCPs VT1508A/09A . . . . . . . . . . . . . . .   page 435
• Thermocouple Type T, SCPs VT1501A/02A/03A . . . . . . . . . . .   page 436
• Thermocouple Type T, SCPs VT1508A/09A . . . . . . . . . . . . . . .   page 437
• 5k Thermistor Reference, SCPs VT1501A/02A/03A. . . . . . . . .   page 438

 0.0625

0.25

1
4

16

0.01%
0.01%
0.01%
0.01%
0.01%

5.3 

μ

V

10.3 

μ

V

31

 

μ

V

122 

μ

V

488 

μ

V

18 

μ

V

45 

μ

V

110 

μ

V

450 

μ

V

1.8 mV

8 

μ

V

24 

μ

V

90 

μ

V

366 

μ

V

1.5 mV

Temperature Coefficient: Gain - 10 ppm/°C. Offset - (0 - 40 °C)  0.14 

µ

V/°C, (40 - 55 °C) 0.8 

µ

V + 0.38 

µ

V/°C 

Measurement Accuracy 
dc volts 

 

 (90 days) 23 °C 

±

1 °C (with *CAL? done after 1 hr warm up and CAL:ZERO? within 5 min.).

NOTE:

 If autoranging is ON:

for readings  < 3.8 V, add 

±

0.02% to linearity specifications.

  

 for readings  

≥

 3.8 V, add 

±

0.05% to linearity specifications.

Temperature Accuracy

 

The following pages have temperature accuracy graphs that include instrument and 
firmware linearization errors. The linearization algorithm used is based on the ITS-90 
standard transducer curves. Add transducer accuracy to determine total measurement 
error.

The thermocouple graphs on the following pages include only the errors due to 
measuring the voltage output of the thermocouple, as well as the algorithm errors due 
to converting the thermocouple voltage to temperature. To this error must be added the 
error due to measuring the reference junction temperature with an RTD or a 5k thermistor. 
See the graphs for the RTD or the 5k thermistor to determine this additional error. 
Also, the errors due to gradients across the isothermal reference must be added. If an 
external isothermal reference panel is used, consult the manufacturer’s specifications. 
If VXI Technology termination blocks are used as the isothermal reference, see the 
notes below.

NOTES
1)

 When using the Terminal Module as the isothermal reference, add ±0.6 °C to the 

thermocouple accuracy specs to account for temperature gradients across the Terminal 
Module. The ambient temperature of the air surrounding the Terminal Module must be 
within 

±

2 °C of the temperature of the inlet cooling air to the VXI mainframe.

2)

 When using the VT1586A Rack-Mount Terminal Panel as the isothermal reference, 

add 

±

0.2 °C to the thermocouple accuracy specs to account for temperature gradients 

across the VT1586A. The VT1586A should be mounted in the bottom part of the rack, 
below and away from other heat sources for best performance.

The temperature specification graphs are found on the following pages:

Содержание VT1422A


















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VT1422A

Caliber MCD893 Operating Instructions Manual preview
MCD893
Бренд: Caliber Страницы: 26
IAdea XDS-101 User Manual preview
XDS-101
Бренд: IAdea Страницы: 15
IAdea MBR-1100 Hardware User Manual preview
MBR-1100
Бренд: IAdea Страницы: 6
D-Link 100BASE-FX User Manual preview
100BASE-FX
Бренд: D-Link Страницы: 6
Vector Industrial Series VEC023 Owner'S Manual & Warranty Information preview
Industrial Series VEC023
Бренд: Vector Страницы: 8
3onedata IMC101B Series Quick Installation Manual preview
IMC101B Series
Бренд: 3onedata Страницы: 3
ICP DAS USA NC-10TFT Installation Manual preview
NC-10TFT
Бренд: ICP DAS USA Страницы: 8
Vanner IT12-1400 Owner'S Manual preview
IT12-1400
Бренд: Vanner Страницы: 28
Oriental motor NETC01-M2 User Manual preview
NETC01-M2
Бренд: Oriental motor Страницы: 56
LEXIBOOK DMP103 Series Instruction Manual preview
DMP103 Series
Бренд: LEXIBOOK Страницы: 66
Viking ACD-10 Technical Practice preview
ACD-10
Бренд: Viking Страницы: 6
Triotech XBMC Clearstream Quick Start Manual preview
XBMC Clearstream
Бренд: Triotech Страницы: 16
LEAB Clayton Power 1012 User Manual preview
Clayton Power 1012
Бренд: LEAB Страницы: 20
Omnitron Systems Technology FlexPoint TR User Instructions preview
FlexPoint TR
Бренд: Omnitron Systems Technology Страницы: 1
Enerdrive EPC 1600-12 Owner'S Manual preview
EPC 1600-12
Бренд: Enerdrive Страницы: 48
Visual Circuits ReelTime 4 User Manual preview
ReelTime 4
Бренд: Visual Circuits Страницы: 75
SIIG AV-GM08K3-S1K Manual preview
AV-GM08K3-S1K
Бренд: SIIG Страницы: 34
RDZ FLOOR-S Installation & Technical Manual preview
FLOOR-S
Бренд: RDZ Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды