17
13.2. Inscribing tare value
You can also inscribe a tare value. While in weighing’s mode press:
•
Press simultaneously
and
,
•
You will see :
•
Using
and
set
the tare value
,
•
Press
,
•
Program returns to w
eighing’s mode. The inscribed tare value can be seen on the display
with
"
–"
sign,
•
Tare can be inscribed anytime in
weighing’s mode.
Notice:
1. You cannot inscribe a new tare value when the tare value in memory is greater than zero. In the
case of trying this the <Err3> message will be displayed and short audible signal will be emitted.
2. Users can also enter up to 9 tare values to the scale memory.
13.3. Zeroing
To
ZERO
the scale press:
.
The scale will display zero and following pictograms:
and
. Zeroing is only possible
within the scope of
±2%
of full scale. While zeroing outside the scope of
±2%
you will see
<Err2>
.
Zeroing is possible only in stable state.
Notice:
Zeroing is possible only within the ±2% interval of the maximal range. If zeroing is performed
beyond this range the <Err2> message and short audible signal will be emitted.
Содержание P2.H Series
