Fig. 17
4.
Reverse procedure to install.
NOTE:
Ensure that terminal connections are
completely seated and tight.
5.
Check for proper operation.
POWER CORD
1.
2.
Remove rear housing lid as outlined under
REMOVE CLAMSHELL FROM FRAME.
3.
Fully raise platen to access the left arm wireway
cover (1, Fig. 18) then remove the cover.
Fig. 18
4.
Note power cord wire locations and disconnect
from terminal strip.
Fig. 19
5.
Pull wire out from the left arm wire way, thought
grommet in top control box, through the upper
pivot rod, through rear housing wire path tube
(vertical) to remove from machine.
6.
Reverse procedure to install.
7.
Check for proper operation.
HIGH LIMIT
1.
2.
Note wire locations (1, Fig. 20) and disconnect
from high limit (2, Fig. 20).
Fig. 20
3.
Remove mounting nut (1, Fig. 21) securing high
limit to control box mounting shelf.
4.
Access high limit capillary bulb:
A.
Note wire tie locations and remove from
capillary tube and wire bundle.
B.
Note heating element wire locations (2, Fig.
21) and disconnect from terminal strip.
VMCS HEAVY DUTY ELECTRIC GRIDDLE TOP - REMOVAL AND REPLACEMENT OF PARTS
F45571 (0316)
Page 8 of 19
