—
12
—
CLEANING
Turn off gas supply to the machine.
Open Top Burners
Daily
Remove grates and clean under and around open burners.
Weekly
1. Clean each burner thoroughly. Clean stainless steel or chromed surfaces with a damp cloth and
polish with a soft dry cloth. A detergent may be used for cleaning. To remove discolorations, use
a non-abrasive cleaner, always rubbing with the grain of the metal.
1. Clean bottom drip pan. To remove drip pan, reach under and lift rear of pan about 1" (25 mm),
slide pan to the rear about
1
/
2
" (13 mm), and drop front end of pan free. Slide pan forward
between the front legs. To replace pan, reverse this procedure.
2. Burner air shutter openings must be kept clean.
3. Main burner ports and throats must be thoroughly cleaned. Venturi must be free from grease
and lint. To clean burners, run through a dish washer. Stand on air shutter end to air dry.
DO NOT insert pick in burner port hole.
Griddle Top
Empty grease daily. Clean griddle top regularly.
KEEP GRIDDLE PLATE SURFACE CLEAN. To produce evenly cooked, browned products, keep
griddle free of carbonized grease. Carbonized grease on the surface hinders the transfer of heat from
the griddle surface to food. This results in spotty browning and loss of cooking efficiency, and
carbonized grease tends to stick to the griddled foods, giving them a highly unsatisfactory and
unappetizing appearance.
To keep the griddle clean, follow these simple instructions:
After Each Use
Clean griddle with a wire brush or flexible spatula.
Daily
1. Thoroughly clean backsplash, sides and front. Remove grease drawer, empty it and wash it out
in the same manner as any ordinary cooking utensil.
2. Clean griddle surface thoroughly. Use a griddle stone, wire brush or stainless steel wool on the
surface. Rub with the grain of the metal while the griddle is still warm. A detergent may be used
on the plate surface to help clean it, but you must ensure the detergent is thoroughly removed.
3. Clean stainless surfaces with a damp cloth and polish with a soft dry cloth. To remove
discolorations, use a non-abrasive cleaner.
Disconnect the electrical power and follow lockout / tagout procedures.
