E36LC SERIES ELECTRIC RESTAURANT RANGES - REMOVAL AND REPLACEMENT OF PARTS
F25297 (July 2008)
Page 14 of 28
INFINITE SWITCH
1.
Pull off infinite switch knob.
2.
Remove washer nut from applicable infinite
switch stem.
3.
Open control panel as outlined under COVERS
AND PANELS.
4.
Remove infinite switch wire connections from
switch being replaced. Note wire locations.
5.
Remove infinite switch.
6.
Reverse procedure to install.
7.
Check range for proper operation.
ROCKER SWITCH
1.
Open control panel as outlined under COVERS
AND PANELS.
2.
Disconnect rocker switch electrical connections
noting their locations.
3.
Squeeze in on the tabs at the ends of the rocker
switch and push through the control panel.
4.
Reverse procedure to install.
5.
Check range for proper operation.