E36LC SERIES ELECTRIC RESTAURANT RANGES - REMOVAL AND REPLACEMENT OF PARTS
F25297 (July 2008)
Page 13 of 28
GRIDDLE AND HOT TOP
THERMOSTATS
1.
Remove thermostat knob.
2.
Remove thermostat mounting screws.
3.
Open the control panel as outlined under
COVERS AND PANELS.
4.
Disconnect the lead wires from the thermostat
noting their locations.
5.
Access underside of range top as outlined
under RANGE TOPS.
6.
Remove fasteners from thermostat bulb clamp.
NOTE:
See GRIDDLE HEATING ELEMENT to
access griddle thermostat bulb.
7.
Remove thermostat bulb from clamp.
8.
Remove thermostat.
NOTE:
Do not kink capillary tube.
9.
Reverse procedure to install.
NOTE:
Route capillary tube so it does not contact
any electrical component.
10. Perform HOT TOP or GRIDDLE THERMOSTAT
CALIBRATION as outlined under SERVICE
PROCEDURES AND ADJUSTMENTS.
11. Check range for proper operation.
HOT TOP SHOWN