JGSS66EEL/SEL
GE
®
30" Slide-In Front Control Gas Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 10/17
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
NOTE:
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90° walls
should be placed to avoid interference with the handle.
NOTE:
Cabinets installed adjacent to slide-in
ranges must have an adhesion spec of at least 194°
temperature rating.
INSTALLATION INFORMATION:
Before installing,
consult installation instructions packed with product
for current dimensional data.
For all installations, install the required rear trim to
back of range with 4 screws provided.
ADA
COMPLIANT
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
Side Wall
Gas
and
electrical
supply
30"
16"
max to
cabinets
above
counter
6" right side
6" left side
minimum
to side wall
36"
30"
2"
4"
9"
13"
5"
4 1/2"
18"
minimum
to cabinet
above counter
0"
minimum
to cabinets
below
cooktop
24"
30"
min
14 1/2"
12 1/2"
30"
26 3/4"
w/o handle
36 1/4"
+/- 1/4"
47"
29 1/4"
w/ handle
1 1/8"
Rear vent
2"
To rear
wall
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
Side Wall
Gas
and
electrical
supply
30"
16"
max to
cabinets
above
counter
6" right side
6" left side
minimum
to side wall
36"
30"
2"
4"
9"
13"
5"
4 1/2"
18"
minimum
to cabinet
above counter
0"
minimum
to cabinets
below
cooktop
24"
30"
min
14 1/2"
12 1/2"
30"
26 3/4"
w/o handle
36 1/4"
+/- 1/4"
47"
29 1/4"
w/ handle
1 1/8"
Rear vent
2"
To rear
wall
